金沙检测线路js95

1.衣着好防护用品后方可上岗举行操作。。。。。。。。
2.起动前检查圆盘是否水平位置，，，，，，，用手盘动三角带，，，，，，，检查运转是否无邪。。。。。。。。
3.加入润滑油后方可起动，，，，，，，起动时检查圆盘转动偏向，，，，，，，以确定电机接线是否准确。。。。。。。。
4.检查有无周期性噪音及震惊，，，，，，，及有无漏油征象。。。。。。。。
5.检查轴承温升及润滑油温升情形。。。。。。。。
6.检查一切正常后方可正式投入生产。。。。。。。。
7.开车前应详细检查刮板和运动套筒的位置是否切合喂料量的要求。。。。。。。。
8.开车时待圆盘传动平稳后，，，，，，，再翻开螺旋闸门，，，，，，，停车时应先关闭螺旋闸门再停车。。。。。。。。
9.转动中应经常检查润滑情形、轴承事情情形，，，，，，，各部分温升情形，，，，，，，若是发明有过热的征象，，，，，，，应连忙消除。。。。。。。。
10.恒久运转时应按期检查刮板，，，，，，，运动套筒、圆盘蜗轮、蜗杆、三角带以及密封件的磨损情形，，，，，，，以便实时调解、修理或替换。。。。。。。。装备运转时，，，，，，，不允许举行调解、修理等作业。。。。。。。。
11.下班前搞好调备及周边卫生。。。。。。。。
12.磨练和替换易损零件的限期，，，，，，，凭证使用情形作出决议。。。。。。。。

中译英：
1 Wear protective supplies before induction operation.
2 Before starting to check whether the disc level position, hand wheel moving belt, check the operation is flexible.
3 Add lubricating oil before starting, starting when the check disk rotation direction, in order to determine the motor wiring is correct.
4 Check whether the periodic noise and vibration, and no leakage phenomenon.
5 Check the bearing temperature rise and lubricating oil temperature rise.
6 All the normal checks before the formal put into production.
7 Before driving should be inspected in detail the scraper and activity the position of the sleeve is in accordance with the volume of feed requirements.
8 Drive for disc drive after a smooth, then open the spiral gate, parking and parking should be closed spiral gate.
9 Rotation should always check the lubrication condition, working condition of bearings, the temperature rise of the, if found to have overheating phenomenon, should be immediately removed.
10 Long term operation should be regularly checked scraper, a movable sleeve, circular worm, worm, belt and seals wear, in order to timely adjust, repair or replacement. Equipment operation, does not allow for adjustment, repair and operating.
11 Work do well equipment and peripheral health.
12 Maintenance and replacement of wearing parts of the period, according to the usage decision.
(图/文http://www.changrong-jx.com/)